Filter
Top Products
Ringer ID for handset
You can select the desired ringer tone to a
group that each phonebook entry is assigned
(page 32). When a call is received from a
caller assigned to a group, the ringer tone you
selected for that group rings instead of the
called line’s ringer tone (page 18, 38, 39) after
caller information is displayed. If you select
“Current ringer” (default), the unit uses
the called line’s ringer tone you selected on
page 39 when calls from this group are
received.
Handset
1 MFN a MM
ENUN
2 MbN: “Group” a MSELECTN
3 MbN: Select the desired group. a
MSELECTN
4 MbN: Select the desired ringer tone. a
MSAVEN
5 MOFFN
Caller list
I
mportant:
R Only 1 person can access the caller list at a
time.
R Make sure the unit’s date and time setting
is correct (page 16).
Viewing the caller list and calling
b
ack
n Using a cellular line
Handset
1 MCN
CID
2 Press MCN to search from the most recent
call, or MDN to search from the oldest call.
3 To call back, press MSELECTN.
To exit, press MOFFN.
4 MCELLN
R The unit starts dialing when:
– only 1 cellular phone is paired.
– a specific line is set to make cellular
c
alls (page 20).
5 MbN: Select the desired cellular phone. a
MSELECTN
Base unit
1 MC
IDN
2 Press MCN to search from the most recent
call, or MDN to search from the oldest call.
3 To call back, press MCELL 1N or MCELL
2N.
To exit, press MEXITN.
n Using the landline
Handset / Base unit
1 P
roceed with the operation for your unit.
Handset: MCN CID
Base unit: MCIDN
2 Press MCN to search from the most recent
call, or MDN to search from the oldest call.
3 Proceed with the operation for your unit.
Handset:
– To call back, press M
N.
–
To exit, press MOFFN.
Base unit:
– To call back, press MZN.
– To exit, press MEXITN.
Note for handset and base unit:
R If the entry has already been viewed or
answered, “
” is displayed, even if it was
v
iewed or answered using another unit.
R In step 2 for handset or step 2 for base unit,
if
is displayed, not all of the information is
s
hown. To see the remaining information:
Handset:
Press MEN.
To return to the previous screen, press MFN.
Base unit:
Press M
N.
To return to the previous screen, press
M
N.
R or indicates the caller information
w
as received from the cellular line.
For assistance, please visit http://www.panasonic.com/help
49
Caller ID Service
TG78xx(en)_1210_ver101.pdf 49 2012/12/10 21:19:29