Panasonic KX-TG7623 Bluetooth Headset User Manual


 
Using a Bluetooth
w
ireless headset
(optional) for landline
calls
By registering a Bluetooth headset to the
base unit, you can have a hands-free
conversation wirelessly for landline calls.
Important:
R 1 headset can be registered to the
base unit. However, only one
Bluetooth device (cellular phone or
headset) can be connected to the
base unit at a time.
R For best performance, we
recommend using a Bluetooth
headset within 1 m (3.3 feet) of the
base unit. A headset can
communicate with the base unit within
a range of approximately 10 m (33
feet).
Registering a headset to the
b
ase unit
Important:
R Make sure that the Bluetooth headset
is not connected to any other
Bluetooth device.
1 Your headset:
Set your headset to registration
mode.
R Refer to the headset operating
instructions.
2 Handset:
MMENUN#621
3 Enter your headset PIN.
R Typically, default PIN is 0000.
Refer to the headset operating
instructions.
4 Press MOKN, then wait until a long
beep sounds.
5 MO
FFN
R When the HEADSET indicator on
the base unit lights green, you are
ready to use the headset.
Connecting/disconnecting a headset
I
f you cannot connect the headset and
base unit using the headset, you can
connect using the unit.
To use your headset with another
Bluetooth device such as a cellular
phone, you may need to disconnect it
from the base unit.
Important:
R Make sure that the headset is turned
on.
Base unit
*
1
*1 KX-TG7641 series: page 3
To connect:
Press MHEADSETN.
To disconnect:
Press and hold MHEADSETN until a long
beep sounds.
Handset
1 T
o connect/disconnect:
MMENUN#622
R A long beep sounds.
2 MOFFN
Deregistering a headset
Y
ou can cancel a registration of the
headset that is stored to the base unit.
See “Deregistering Bluetooth devices”,
page 23.
Operating a Bluetooth
w
ireless headset using a
landline
Important:
R Refer to your headset operating
instructions for headset operations.
For assistance, please visit http://www.panasonic.com/help
55
Using Bluetooth Devices