Panasonic KX-TG7623 Bluetooth Headset User Manual


 
for the base unit, press
MS
P-PHONEN instead of the line
button (MCELL 1N or MCELL 2N) set
for the cellular line selection
(page 22, 31).
(KX-TG7641 series: page 3)
R Once you set this mode, the following
features cannot be used:
Landline features (page 45)
Answering system (page 57)
Messages cannot be received.
However, you can only record voice
memo messages (page 60).
Voice mail features (page 64)
R After this mode is turned on or off, the
base unit reboots.
Bluetooth connections from cellular
phones or headset are
disconnected. If the auto
connection is turned on (page 21),
the cellular phones are
reconnected.
will be displayed on the handset
m
omentarily. The handset can be
used once
is displayed.
When you use the landline again
B
efore connecting the telephone line to
the base unit, select Off in step 2,
“Cellular line only mode (If you do not
use the landline)”, page 21.
Cellular line selection
T
his feature determines which cellular
line is selected to make cellular calls
when:
you press MCELLN on the handset.
you press M
N
or M
N
on the
handset while the cellular line only
mode is turned on.
you press MSP-PHONEN on the base
unit while the cellular line only mode is
turned on. (KX-TG7641 series: page 3)
The following settings are available:
M
anual (handset only: default):
You can select the desired cellular
line when making a call.
“Cellular phone 1” (base unit default):
CELL 1 is selected.
“Cellular phone 2”: CELL 2 is selected.
1 MMENUN
2 For handset: #634
For base unit
*1
: #*634
3 MbN: Select the desired setting.
4 MSAVEN a MOFFN
*1 KX-TG7641 series: page 3
Storing your area code (for
d
ialing only a 7-digit phone
number to make a local call)
You need to add your area code when
making cellular calls to a phone number
in your area. Once you store your area
code, it is automatically added to the
beginning of the 7-digit phone number
when making cellular calls.
1 MMENUN#633
2 Enter the 3-digit area code.
R To correct a digit, press MCLEARN.
3 MSAVEN a MOFFN
Changing the Bluetooth PIN
(
Personal Identification
Number)
The PIN is used to register cellular
phones to the base unit. The default PIN
is 0000. To prevent unauthorized
access to this product, we recommend
that you change the PIN, and keep it
confidential.
Important:
R Please make note of your new PIN.
The unit does not reveal the PIN to
you. If you forget your PIN, see
page 79.
1 MMENUN#619
22
For assistance, please visit http://www.panasonic.com/help
Link to Cell