Filter
Top Products
Useful Information
42
For assistance, please visit http://www.panasonic.com/help
Battery recharge
Making/answering calls, intercom
I cannot register a handset
to a base unit.
L The maximum number of handsets (6) is already
registered to the base unit. Cancel unused
handset registrations from the base unit (page 26).
L Place the handset and the base unit away from
other electrical appliances.
Problem Cause/solution
The handset beeps and/or
) flashes.
L Battery charge is low. Fully charge the batteries
(page 8).
I fully charged the
batteries, but ) still
flashes or 0 is displayed.
L Clean the charge contacts and charge again
(page 9).
L It is time to replace the batteries (page 8).
I fully charged the
batteries, but the operating
time seems to be shorter.
L Clean the battery ends (S, T) and the charge
contacts with a dry cloth and charge again.
Problem Cause/solution
_ is displayed. L The handset is too far from the base unit. Move
closer.
L The base unit’s AC adaptor is not properly
connected. Reconnect AC adaptor to the base
unit.
L You are using the handset or base unit in an area
with high electrical interference. Re-position the
base unit and use the handset away from sources
of interference.
L The handset is not registered to the base unit.
Register it (page 26).
Noise is heard, sound cuts
in and out.
L You are using the handset or base unit in an area
with high electrical interference. Re-position the
base unit and use the handset away from sources
of interference.
L Move closer to the base unit.
L If you use a DSL/ADSL service, we recommend
connecting a DSL/ADSL filter between the base
unit and the telephone line jack. Contact your
DSL/ADSL provider for details.
Problem Cause/solution
TG743x(e).book Page 42 Monday, December 8, 2008 1:36 PM