Filter
Top Products
Programming
18
For assistance, please visit http://www.panasonic.com/help
Programmable settings
You can customize the unit by programming the following features using the handset.
To access the features, there are 2 methods:
– scrolling through the display menus (page 18)
– using the direct commands (page 20)
L Direct command is the main method used in these operating instructions.
Programming by scrolling through the display menus
1
{MENU} (center of joystick)
2 Select the desired top-menu by pushing the joystick in any direction. i
{SELECT}
3 Push the joystick down or up to select the desired item in sub-menu 1. i
{SELECT}
L In some cases, you may need to select from sub-menu 2. i {SELECT}
4 Push the joystick down or up to select the desired setting. i {SAVE}
L This step may vary depending on the feature being programmed.
L To exit the operation, press {OFF}.
Note:
L See page 20 for the default settings.
Main menu Sub-menu 1 Sub-menu 2 Page
Caller list
W
––28
Answering device
s
Message list –32
Play new msg. –32
Play all msg. –32
Erase all msg.
*1
–33
Greeting Record greeting
*1
31
Check greeting 31
Pre-recorded
*1
31
Settings Ring count
*1
34
Recording time
*1
35
Remote code
*1
33
Answer on
*1
–30
Answer off
*1
–30
V.M. access
#
––37
TG743x(e).book Page 18 Monday, December 8, 2008 1:36 PM