Filter
Top Products
Preparation
14
Battery level
Panasonic Ni-MH battery
performance (supplied batteries)
Note:
L It is normal for batteries not to reach
full capacity at the initial charge.
Maximum battery performance is
reached after a few complete cycles of
charge/discharge (use).
L Actual battery performance depends
on a combination of how often the
handset is in use and how often it is
not in use (standby).
L Even after the handset is fully
charged, the handset can be left on
the base unit or charger without any ill
effect on the batteries.
L The battery level may not be
displayed correctly after you replace
the batteries. In this case, place the
handset on the base unit or charger
and let it charge for at least 7 hours.
Wall mounting
Base unit
Symbols used in these
operating instructions
Battery icon Battery level
1 High
2 Medium
3 Low
L When flashing:
Needs charging.
Operation Operating
time
In continuous use 17 hours max.
Not in use
(standby)
150 hours
max.
Symbol Meaning
{} The words in the
brackets indicate button
names on the handset
and base unit.
Example:
Unit keys: {C}, {ih}
i Proceed to the next
operation.
“” The words in quotations
indicate the menu on the
display.
Example:
“Auto Talk”
Hook
65 mm
Screws
(Not supplied)
Longer than
20 mm
Space
(6.5 mm)
TG7331-7341BX(e).book Page 14 Wednesday, August 20, 2008 10:31 AM