Filter
Top Products
– a pre-recorded greeting message
Recording your greeting message
1
#302
2 MbN: “Yes” a
3 After a beep sounds, hold the handset
about 20 cm away and speak clearly into
the microphone (2 minutes and 30
seconds max.).
4 Press
to stop recording.
5 M
N
Using a pre-recorded greeting
message
The unit provides 2 pre-recorded greeting
messages:
– If you erase or do not record your own
greeting message, the unit plays a
pre-recorded greeting asking callers to
leave a message.
– If the message recording time (page 39)
is set to “Greeting Only”, callers’
messages are not recorded and the unit
plays a different pre-recorded greeting
message asking callers to call again.
Resetting to a pre-recorded greeting
message
If you want to use a pre-recorded greeting
message once you record your own greeting
message, you need to erase your own
greeting message.
1
#304
2 a M N
Playing back the greeting
message
1
#303
2 M
N
Listening to messages
using the base unit
When new messages have been recorded,
M
N on the base unit flashes.
Press M N.
R If new messages have been recorded, the
base unit plays back new messages.
R If there are no new messages, the base
unit plays back all messages.
Operating the answering system
during playback
Key Operation
MjN or MkN Adjust the speaker volume
M N
Repeat message
*1
M N Skip message
MnN Stop playback
M N
Erase currently playing
message
*1 If pressed within the first 5 seconds of a
message, the previous message is
played.
Erasing all messages
Press M
N 2 times while the unit is not in use.
Listening to messages
using the handset
When new messages have been recorded,
is displayed on the handset with the total
number of new messages.
1 To listen to new messages:
#323
To listen to all messages:
#324
2 When finished, press M
N.
Note:
R To switch to the receiver, press M
N.
36
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
Answering System
TG67xxE(en)_0802_ver102.pdf 36 2012/08/02 16:27:47