Filter
Top Products
2 W
hen the other party answers,
speak into the microphone.
R Speak alternately with the other
party.
3 When you finish talking, press
MSP-PHONEN.
Note:
R For best performance, use the
speakerphone in a quiet environment.
R While on a call, you can switch from
the base unit to the handset:
– Press M
N
on the handset, then
press MSP-PHONEN on the base
unit with the call sharing mode on
(page 27).
– If the handset is on the base unit,
simply lift it.
Adjusting the speaker volume
P
ress MjN or MkN repeatedly while
talking.
Answering calls
Using the handset
W
hen a call is being received, the ringer
indicator flashes rapidly.
1 Lift the handset and press M
N
or
M
N
when the unit rings.
R You can also answer the call by
pressing any dial key from 0 to
9, *, or #. (Any key answer
feature)
2 When you finish talking, press
MOFFN or place the handset on the
base unit or charger.
Auto talk
Y
ou can answer calls simply by lifting
the handset off the base unit or charger.
You do not need to press M
N.
To turn
this feature on, see page 26.
Adjusting the handset ringer volume
n W
hile the handset is ringing for an
incoming call:
Press MjN or MkN repeatedly to
select the desired volume.
n Programming the volume
beforehand:
1 MMENUN#160
2 MbN: Select the desired volume.
3 MSAVEN a MOFFN
Temporary handset ringer off
While the handset is ringing for a call,
you can turn the ringer off temporarily by
pressing M
N.
Using the base unit
When a call is being received, the
SP-PHONE indicator flashes rapidly.
1 Press MSP-PHONEN when the unit
rings.
2 Speak into the microphone.
3 When you finish talking, press
MSP-PHONEN.
Adjusting the base unit ringer volume
P
ress MjN or MkN repeatedly to select
the desired volume.
R To turn the ringer off, press and hold
MkN until the unit beeps.
Note:
R Even when the ringer volume is set to
off, the base unit still rings for
intercom calls (page 43).
16
For assistance, please visit http://www.panasonic.com/help
Making/Answering Calls