Filter
Top Products
Making calls
Using the handset
1 L
ift the handset and dial the phone
number.
R To correct a digit, press MCLEARN.
2 Press M
N or MCALLN.
3 When you finish talking, press
MOFFN or place the handset on the
base unit or charger.
Using the speakerphone
1 D
ial the phone number and press
M
N.
R S
peak alternately with the other
party.
2 When you finish talking, press
MOFFN.
Note:
R For best performance, use the
speakerphone in a quiet environment.
R To switch back to the receiver, press
M
N/M N.
Adjusting the receiver or speaker
v
olume
Press MjN or MkN repeatedly while
talking.
Note:
R There are 5 volume levels (1 to 5) for
the receiver. When you change the
receiver volume to level 5 (maximum
level), the volume returns to level 4
(default) after you hang up.
Making a call using the redial list
T
he last 5 phone numbers dialed are
stored in the redial list (each 48 digits
max.).
1 MR
EDIALN or MEN REDIAL
R If there is a new message in the
voice mail or answering system,
MREDIALN is not displayed.
2 MbN: Select the desired phone
number.
3 M
N
Erasing a number in the redial list
1 MR
EDIALN or MEN REDIAL
2 MbN: Select the desired phone
number. a MERASEN
3 MbN: “Yes” a MSELECTN
4 MOFFN
Pause (for PBX/long distance service
u
sers)
A pause is sometimes required when
making calls using a PBX or long
distance service. When storing a calling
card access number and/or PIN in the
phonebook, a pause is also needed
(page 21).
Example: If you need to dial the line
access number “9” when making outside
calls with a PBX:
1 9 a MPAUSEN
2 Dial the phone number. a M
N
Note:
R A 3.5 second pause is inserted each
time MPAUSEN is pressed. Repeat as
needed to create longer pauses.
Using the base unit
Y
ou can make calls with the base unit
after storing phone number in speed dial
key (page 22).
1 Press the speed dial key (MAN to
MCN).
For assistance, please visit http://www.panasonic.com/help
15
Making/Answering Calls