Filter
Top Products
Programming
24
*1 If “System” column is checked, you do not need to program the same item using
another handset. (KX-TG6542)
*2 If the Caller ID time and date display service is available in your area, this feature
allows the unit to automatically adjust the date and time each time caller
information including date and time is received.
To turn this feature on, select “Caller ID auto”. To turn this feature off, select
“Manual”. (Caller ID subscribers only)
To use this feature, set the date and time first (page 12).
*3 When the ringer volume is turned off, ~ is displayed and the handset does not ring
for outside calls. However even when the ringer volume is set to off, the handset
still rings for alarm (page 25), intercom calls, and paging (page 40).
*4 If you select one of the melody ringer tones, the ringer tone continues to play for
several seconds even if the caller has already hung up. You may either hear a dial
tone or no one on the line when you answer the call.
*5 The preset melodies in this product are used with permission of © 2009
Copyrights Vision Inc.
*6 Turn this feature off if you prefer not to hear key tones while you are dialing or
pressing any keys, including confirmation tones and error tones.
*7 If you subscribe to a Caller ID service and want to view the caller’s information
after lifting up the handset to answer a call, turn off this feature.
*8 The flash time depends on your telephone exchange or host PBX. Contact your
PBX supplier if necessary.
*9 Generally, the line mode setting should not be changed. This setting automatically
maintains receiver volume at the proper level depending on the current telephone
line condition. Set the line mode to “A” if telephone line condition is not good.
Recording time {3}{0}{5} 1 min <3 min>
Greeting only
r 36
Remote code {3}{0}{6} <111> r 34
Screen call {3}{1}{0} <On> Off –31
Answer on {3}{2}{7} – r 31
Answer off {3}{2}{8} – r 31
Feature Code Setting System
*1
Page
TG654xBX(e).book Page 24 Tuesday, June 28, 2011 10:16 AM