Filter
Top Products
Programming
28
Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
Storing unwanted callers
You can store up to 30 phone numbers in
the call barred list by using the caller list
or by entering the numbers directly.
Important:
L You must store the phone number
with an area code in the call barred
list.
■ From the caller list:
1 {<} (y)
2 {V}/{^}: Select the entry to be
barred. i I
3 {V}/{^}: “Caller Barred” i
M
4 {V}/{^}: “Yes” i M i
{ic}
■ By entering phone numbers:
1 8 i {#}{2}{1}{7} i m
2 Enter the phone number (24
digits max.). i M
L To erase a digit, press ^.
3 {ic}
Viewing/editing/erasing bar call
numbers
1 8 i {#}{2}{1}{7}
2 {V}/{^}: Select the desired entry.
L To exit, press {ic}.
3 To edit a number:
~ i Edit the phone number.
i M i {ic}
To erase a number:
W i {V}/{^}: “Yes” i M
i {ic}
Note:
L When editing, press the desired dial
key to add, ^ to erase.
Changing the base unit PIN
(Personal Identification
Number)
Important:
L If you change the PIN, please make
note of your new PIN. The unit will not
reveal the PIN to you. If you forget
your PIN, see page 44.
1 8 i {#}{1}{3}{2}
2 Enter the current 4-digit base unit
PIN (default: “0000”).
3 Enter the new 4-digit base unit PIN.
i M i {ic}
Registering a unit
Operating additional units
Additional handsets
Up to 6 handsets can be registered to
the base unit.
Important:
L The additional handset model
recommended for use with this unit is
noted on page 4. If another handset
model is used, certain operations
(handset settings, base unit settings,
etc.) may not be available.
Registering a handset to the
base unit
The supplied handset and base unit are
pre-registered. If for some reason the
handset is not registered to the base unit
(for example, _ is displayed even when
the handset is near the base unit), re-
register the handset.
1 Handset:
8 i {#}{1}{3}{0}
TG6511-6521E(e).book Page 28 Monday, January 11, 2010 8:48 AM