Filter
Top Products
Answering System
31
Answering system
The answering system can answer and
record calls for you when you are
unavailable to answer the phone.
You can also set the unit to play a
greeting message but not to record
caller messages by selecting
“Greeting Only” as the recording
time setting (page 36).
Important:
L When callers leave messages, the
unit records the day and time of each
message. Make sure the date and
time have been set correctly (page
14).
L Answering system announcements
are in English only.
Memory capacity (including
your greeting message)
The total recording capacity is about 20
minutes. A maximum of 64 messages
can be recorded.
Note:
L If message memory becomes full:
– “Messages Full” is shown on the
handset display.
– The answer on indicator on the
base unit flashes rapidly when the
answering system is turned on.
L When the message memory becomes
full:
– If you use the pre-recorded greeting
message, the unit automatically
switches to another pre-recorded
greeting message asking callers to
call again later.
– If you recorded your own greeting
message, the same message is still
announced to callers even though
their messages are not recorded.
Turning the answering
system on/off
The answering system is preset to on.
Press {s} to turn on/off the answering
system.
L When the answering system is turned
on, the answer on indicator lights up.
1 To turn on:
8 i {#}{3}{2}{7}
To turn off:
8 i {#}{3}{2}{8}
2 {ic}
Note:
L When the answering system is turned
on, u is displayed next to the battery
icon.
Call screening
While a caller is leaving a message, you
can listen to the call through the
handset’s speaker. To adjust the
speaker volume, press {^} or {V}
repeatedly. You can answer the call by
pressing {C} on the handset.
The default setting is “On”.
1 8 i {#}{3}{1}{0}
2 {V}/{^}: Select the desired setting.
i M i {ic}
Available for:
KX-TG6521
Base unit
Handset
TG55xx_65xxBX(e).book Page 31 Friday, April 15, 2011 2:35 PM