Filter
Top Products
Programming
28
(for example, _ is displayed even when
the handset is near the base unit), re-
register the handset.
1 Handset:
8 i {#}{1}{3}{0}
2 Base unit:
Proceed with the operation for your
model.
■ KX-TG5511/KX-TG5518/
KX-TG6511/KX-TG6512/
KX-TG6513/KX-TG6519
Press and hold {x} for about 5
seconds. (No registration tone)
■ KX-TG6521
Press and hold {x} for about 5
seconds, until the registration
tone sounds.
L If all registered handsets start
ringing, press the same button to
stop. Then repeat this step.
L The next step must be completed
within 90 seconds.
3 Handset:
Wait until “Base PIN” is displayed.
i Enter the base unit PIN (default:
“0000”). i M
L If you forget your PIN, contact an
authorised service centre.
L When the handset has been
registered successfully, w is
displayed.
Note:
L While registering, “Base in
registering” is displayed on all
registered handsets.
Deregistering a handset
A handset can cancel its own
registration (or the registration of
another handset) that is stored to the
base unit. This allows the handset to end
its wireless connection with the system.
1 8 i {#}{1}{3}{1}
L All handsets registered to the
base unit are displayed.
2 {V}/{^}: Select the handset you
want to cancel. i M
3 {V}/{^}: “Yes” i M
L A confirmation tone sounds.
L The handset does not beep when
cancelling its own registration.
4 {ic}
Key lock
The handset can be locked so that no
calls or settings can be made. Incoming
calls can be answered, but all other
functions are disabled while key lock is
on.
To turn key lock on, press 8 for about
3 seconds.
L & is displayed.
L To turn key lock off, press & for
about 3 seconds.
Note:
L Calls to emergency numbers cannot
be made until key lock is turned off.
TG55xx_65xxBX(e).book Page 28 Friday, April 15, 2011 2:35 PM