Filter
Top Products
Useful Information
43
For assistance, please visit http://www.panasonic.com/help
5 Connect the telephone line cord.
Mount the unit by inserting the
mounting pins into the round
openings on the adaptor (for pin 2,
use the round cut out at the bottom
of the adaptor if you are using the 4
inch phone plate), then slide the unit
down to secure it. Connect the AC
adaptor to power outlet (page 9).
L There are 2 common types of wall
phone plates. The distance
between 1 and 2 may vary
depending on the size of the wall
phone plate installed.
To remove the wall mounting adaptor
While pushing down the release levers
(A), remove the adaptor (B).
Charger
1
Drive the screws (not supplied) into
the wall.
2 Mount the charger (A), then slide it
down (B) and to the right (C) until it
is secure.
83 mm
(3
1
/
4
inches)
or
102 mm
(4 inches)
83 mm
(
3
1
/
4
inches
)
102 mm
(4 inches)
(120 V AC,
60 Hz)
1
2
1
2
B
A
A
25.4 mm
(1 inch)
Screws
(120 V AC, 60 Hz)
A
B
C
TG643x(e).book Page 43 Monday, December 1, 2008 10:13 AM