Filter
Top Products
Useful Information
38 For assistance, please visit http://www.panasonic.com/phonehelp
4 Connect the telephone line cord. Mount
the unit by inserting the mounting pins
into the round openings on the adaptor
(for pin 2, use round cut out at the
bottom of the adaptor if you are using
the 4 inches phone plate), then sliding
the unit down to secure it.
Connect the AC adaptor to power outlet
(page 11).
L There are two common types of wall
phone plates. The distance between
1 and 2 may vary depending on the
size of the wall phone plate installed.
To remove the wall mounting adaptor
While pushing down the release levers
(A), remove the adaptor (B).
83 mm
(
3
1
/
4
inches
)
or
102 mm
(4 inches)
83 mm
(
3
1
/
4
inches
)
102 mm
(4 inches)
2
1
2
1
(120 V AC,
60 Hz)
A
A
B
TG562X.book Page 38 Friday, February 10, 2006 1:41 PM