Filter
Top Products
68
Direct Commands
During programming:
When “ ” or “ ” is displayed, press the right soft key to save the new
settings.
To exit programming, press [OFF].
• If you press the direct command incorrectly, press [OFF], then re-enter
programming mode by pressing [MENU].
• For function details, see the corresponding pages.
*
1
You need to first download melody data from the openLCR web site.
*
2
This feature can be used to activate Caller IQ. See the leaflet included with this
unit for more information.
*
3
For openLCR subscribers only.
*
4
For openLCR subscribers only. If information is not downloaded to your unit, “Get
new Info.?” will be displayed. To download information, see page 80.
*
5
After pressing
[7]
, make sure “
View Info.?
” is displayed, then press the next
command. If Caller IQ is turned off, “
Turn CIQ on?
” is displayed after pressing
[7]
.
Canceling Registration/Re-registration
Canceling the Handset Registration
If you no longer need to use the handset or if you want to use the handset with a
different base unit of the same model, it is necessary to cancel the handset’s
registration from the current base unit.
Only one handset can be canceled at a time.
Make sure the handset and th e base unit near each other and are not being
used.
Menu item Command Selection items Page
Recording time [0] [6] [2] [1]
: 1 minute
[2]
: 2 minutes
[3]
: 3 minutes
[0]
: Greeting only
p. 24
Remote code [0] [6] [3] Go to Step 5 on page 60. –
Change language [0] [8] [1] : English [2] : Spanish p. 18
Message alert [0] [#] [1] : On [0] : Off p. 25
Handset registration [0] [0] [1] Go to Step 5 on page 70. –
Handset deregistration [0] [0] [2] [3] [3] [5] p. 68
1 Press [MENU].
2 Scroll to “Initial setting” by pressing
[d] or [B], then press the soft key ( ).
3 Scroll to “Registration” by pressing [d]
or [B], then press the soft key ( ).
SAVE
OK
Handset
SELECT
Initial setting
SELECT
Registration