Filter
Top Products
Preparing the Answering System
24
Caller’ s Recording Time
You can select “1 minute”, “2 minutes”, “3 minutes” or “Greeting only” for the caller’s
recording time. The factory preset is “3 minutes”.
Number of Rings
You can select the number of times the unit rings before the Answering System
answers a call, from “2” to “7” or “Toll saver”*. The factory preset is “4”.
1 Press [MENU].
2 Scroll to “Initial setting” by pressing
[d] or [B], then press the soft key ( ).
3 Press the soft key ( ) at “Set
answering”.
4 Scroll to “Recording time” by pressing
[d] or [B], then press the soft key ( ).
5 Select the recording time by pressing [d] or
[B].
• You can also select the recording time by
pressing [1], [2], [3], or [0] (Greeting only).
6 Press the soft key ( ), then press [OFF].
If you select “Greeting only”, the unit will answer a call with the greeting
message, and then hang up. The unit will not record any incoming messages.
The base unit will display “ ” instead of the number of messages.
1 Press [MENU].
2 Scroll to “Initial setting” by pressing [d] or [B], then press the
soft key ( ).
3 Press the soft key ( ) at “Set answering”.
4 Press the soft key ( ) at “Number of
rings”.
Handset
SELECT
Initial setting
SELECT
Set answering
SELECT
Recording time
Recording time
:3min
SAVE
Handset
SELECT
SELECT
SELECT
Number of rings