Filter
Top Products
Useful Information
38
Registration
Problem Cause/solution
The handset registration may
have been canceled or the
communication between the
base unit and the handset is
unstable.
L Re-register the handset.
1 Handset: {MENU} i {#}{1}{3}{0}
2 Base unit: Press and hold {LOCATOR}
for 4 seconds. (No registration tone).
– If another registered handset start
ringing, press the same button to stop.
Then repeat this step. (KX-TG4312)
– The next step should be completed
within 90 seconds.
3 Handset: Press {OK}, then wait until a
beep sounds. i {OFF}
– While registering, “Base registering”
is displayed on another handset.
(KX-TG4312)
If the registration fails, try to deregister the
handset.
KX-TG4311
Press {MENU} i {#}{1}{3}{1} i
{3}{3}{5} i {OK} i {1}, then re-register
it again.
KX-TG4312
Use another handset to deregister the
unstable handset. Press {MENU} i
{#}{1}{3}{1} i {3}{3}{5} i {OK} i
{1} or {2} (The handset number which you
want to cancel). Try to re-register it again.
L If the above remedy does not solve the
problem, contact your nearest Panasonic
service center.
TG4311BX.book Page 38 Monday, November 10, 2008 9:32 AM