Filter
Top Products
Programming
21
Programming using the direct commands
1
{MENU} i {#}
2 Enter the desired feature code.
3 Enter the desired setting code. i {Save}
L This step may vary depending on the feature being programmed.
L To exit the operation, press {OFF}.
Note:
L In the following table, < > indicates the default settings.
Feature Feature
code
Setting code System
setting
*1
Page
Auto talk
*2
{2}{0}{0}{1}: On {0}: <Off>–14
Date and time {1}{0}{1} – r 13
Deregistration {1}{3}{1} ––38
Dial lock {2}{5}{1} – r 16
HS
registration
(Handset
registration)
{1}{3}{0} ––38
Key tone
*3
{1}{6}{5}{1}: <On> {0}: Off ––
LCD contrast
(Display contrast)
{1}{4}{5}{1}–{6}: Level 1–6 <3> – –
Night mode
(On/Off)
{2}{3}{8}{1}: On {0}: <Off>–23
Night mode
(Start/End)
{2}{3}{7} <11:00 PM/06:00 AM>– 23
Ringer tone
*4
(Handset)
{1}{6}{1}{1}–{3}: Tone <1>–3
{4}–{7} : Melody 1–4
––
Ringer volume
(Handset)
{1}{6}{0}{1}: Low {2}: Medium
{3}: <High> {0}: Off
––
Set alarm {7}{2}{0}{1}: Once {2}: Daily
{0}: <Off>
–23
Set area code {2}{5}{5} – r 26
Set dial mode {1}{2}{0}{1}: Pulse {2}: <Tone> r 13
Set flash
time
*5
{1}{2}{1}{1}: <700ms> {2}: 600ms
{3}: 400ms {4}: 300ms
{5}: 250ms {6}: 110ms
{7}: 100ms {8}: 90ms
r 15
Set line mode
*6
{1}{2}{2}{1}: A {2}: <B> r –
TG4311BX.book Page 21 Monday, November 10, 2008 9:32 AM