Filter
Top Products
Useful Information
33
Error messages
If the unit detects a problem, one of the following messages is shown on the display.
Display message Cause/solution
Busy
or
System is busy. Please
try again later.
L The called handset is in use.
*1
L Another handset is in use and the system is
busy. Try again later.
*1
L The handset you are using is too far from the
base unit. Move closer and try again.
L The handset’s registration may have been
canceled. Re-register the handset (page 38).
Check tel line L The supplied telephone line cord has not been
connected yet or not connected properly.
Check the connections (page 9).
Dial locked L Dial lock is turned on. To turn it off, see page
16.
Don’t use this battery. L A wrong type of batteries such as Alkaline or
Manganese was inserted. Use only the
rechargeable Ni-MH batteries noted on page
4, 10.
Error!! L The handset’s registration has failed. Move
the handset and base unit away from all
electrical appliances and try again.
L The entered password was wrong in
programming dial lock. Enter the correct
password.
Insert battery L The handset was placed on the base unit or
charger without batteries. Insert the batteries
properly (page 10).
Invalid L There is no handset registered to the base
unit matching the handset number you
entered.
*1
L The handset’s registration may have been
canceled. Re-register the handset (page 38).
No link to base.
Reconnect AC adaptor.
L The handset has lost communication with the
base unit. Move closer to the base unit and try
again.
L Unplug the base unit’s AC adaptor to reset the
unit. Reconnect the adaptor and try again.
L The handset’s registration may have been
canceled. Re-register the handset (page 38).
TG4311BX.book Page 33 Monday, November 10, 2008 9:32 AM