Filter
Top Products
Preparation
10
Charger
L Use only the supplied Panasonic AC
adaptor PQLV209BX.
Note:
L The AC adaptor must remain
connected at all times. (It is normal for
the adaptor to feel warm during use.)
L The AC adaptor should be connected
to a vertically oriented or floor-
mounted AC outlet. Do not connect
the AC adaptor to a ceiling-mounted
AC outlet, as the weight of the adaptor
may cause it to become disconnected.
During a power failure
The unit will not work during a power
failure. We recommend connecting a
corded-type telephone (without AC
adaptor) to the same telephone line or to
the same telephone line jack using a T-
adaptor.
If you subscribe to a DSL/ADSL
service
Please attach a DSL/ADSL filter (contact
your DSL/ADSL provider) to the
telephone line between the base unit
and the telephone line jack in the event
of the following:
– noise is heard during conversations.
– Caller ID features do not function
properly.
Battery installation and
replacement
Important:
L Use the supplied rechargeable
batteries (Part No. HHR-65AAAB).
L When installing the batteries:
– Wipe the battery ends (S, T) with
a dry cloth.
– Avoid touching the battery ends
(S, T ) or the unit contacts.
– Ensure correct polarities (S, T).
L When replacing the batteries:
– USE ONLY rechargeable Ni-MH
batteries AAA (R03) size.
– Do NOT use
Alkaline/Manganese/Ni-Cd
batteries.
– We recommend using the
Panasonic rechargeable batteries
noted on page 4, 6.
Available for:
KX-TG4312
A
(220–240 V AC,
50/60 Hz)
B
Hooks
To single-line
telephone
jack
DSL/ADSL filter
TG4311BX.book Page 10 Monday, November 10, 2008 9:32 AM