Preparation
13
Setting up the unit
before use
Dialing mode
If you cannot make calls, change this
setting according to your telephone line
service. The default setting is “Tone”.
“Tone”: For tone dial service.
“Pulse”: For rotary/pulse dial service.
1 {MENU} i {#}{1}{2}{0}
2 {V}/{^}: Select the desired setting.
3 {Save} i {OFF}
Date and time
1
{MENU} i {#}{1}{0}{1}
2 Enter the current date, month, and
year by selecting 2 digits for each.
Example: 15 July, 2008
{1}{5} {0}{7} {0}{8}
3 Enter the current hour and minute
(12-hour clock format) by selecting 2
digits for each.
Example: 9:30
{0}{9} {3}{0}
4 {AM/PM}: Select “AM” or “PM”.
5 {Save} i {OFF}
Note:
L To correct a digit, press {^}, {V}, {<},
or {>} to move the cursor to the digit,
then make the correction.
L The date and time may be incorrect
after a power failure. In this case, set
the date and time again.
TG4311BX.book Page 13 Monday, November 10, 2008 9:32 AM