Filter
Top Products
Item Meaning
Handset is accessing base
unit (intercom
*1
, paging,
changing base unit
settings, etc.).
Handset is on an outside
call.
R When flashing slowly:
The call is put on hold.
R When flashing rapidly:
An incoming call is now
being received.
ECO
The base unit transmission
power is set to “Low”.
(page 12)
Battery level
Alarm is on. (page 19)
[P]
Privacy mode is on.
*1
(page 18)
New voice mail message
received.
*2
(page 22)
[IN USE]
Someone is using the
line.
*1
*1 KX-TG2713
*2 Voice mail subscribers only
Turning the power on/off
Power on
Press M N for about 1 second.
Power off
Press M N for about 2 seconds.
Initial settings
Symbol meaning:
Example: MbN: “Off”
Press MCN or MDN to select the words in
quotations.
Display language
1 M
N
2 MbN: “Handset Setup” a M
N
3 MbN: “Display Setup” a M N
4 MbN: “Select Language” a M
N
5 MbN: Select your desired language. a
M
N a M N
Note:
R If you select a language you cannot read:
M
N a M N a MDN 3 times a
M
N a MCN 3 times a M N 2
times a MbN: Select your desired
language. a M
N a M N
Date and time
1 M
N
2 MbN: “Handset Setup” a M
N
3 MbN: “Set Date & Time” a M
N
4 Enter the current date, month, and year.
Example: 15 July, 2012
15 07 12
5 Enter the current hour and minute.
Example: 9:30
09 30
R You can select 24-hour or 12-hour
clock format (“AM” or “PM”) by
pressing *.
6 M
N a M N
Note:
R The date and time may be incorrect after a
power failure. In this case, set the date and
time again.
Dialling mode
If you cannot make calls, change this setting
according to your telephone line service. The
default setting is “Tone”.
“Tone”: For tone dial service.
“Pulse”: For rotary/pulse dial service.
1 M
N
2 MbN: “Base Unit Setup” a M N
11
Getting Started
TG2711_13SA(en)_0927_ver001.pdf 11 2012/09/27 12:18:20