Filter
Top Products
18
“
Programmable Functions
You can program the following function items using the base unit. The
display shows the programming instructions. See the corresponding
pages for function details.
Make sure the base unit and cordless handset are not being used.
During programming
*To select a desired function item, scroll through the items by pressing
(›) or (‹). Then press (fl) (Yes key) to go to the next step.
≥You can exit the programming mode any time by pressing (EXIT/STOP).
<Function menu>*
<Function menu>*
1
Date and time To adjust the date and time (p. 13).
Save DIRECT# To store the phone numbers in the DIRECT
buttons (p. 52).
LCD contrast To select the LCD contrast of the base unit
(p. 22).
Set answering
(Base\Unit)
Press (FUNCTION/EDIT) on the base unit.
Scroll to “Set answering” by pressing (›) or (‹), and press (fl)
(Yes key).
1
Greeting record To record the greeting message (p. 23).
Greeting check To check the recorded greeting message
(p. 25).
Remote code To set the remote code (p. 67).
Number of rings To select the number of rings (p. 27).
Recording time To select the caller
’
s recording time (p. 26).
Call monitoring To set the call monitoring (p. 62).