Filter
Top Products
Time:09:30AM
0-9=Time
21
¢
=AM/PM
4
=Next
Make sure the base unit and cordless handset are not being used.
1
Press (FUNCTION/EDIT).
2
Press (fl) (Yes key) at “Date and time”.
3
Enter the current date (year, month, and
day) using 4-digit numbers.
(Ex. To set Apr. 15, 2002, enter “2002”
and “0415”.)
4
Press (›) (Next key).
5
Enter the current time (hour and minute)
using a 4-digit number.
(Ex. To set 9:30, enter “0930”.)
6
Select “AM” or “PM” by pressing ($).
7
Press (›) (Next key).
8
Press (fl) (Save key).
≥A beep sounds.
≥The clock starts working.
≥If 3 beeps sound, the setting is not
correct. Start again from step 3.
≥You can exit the programming mode any time by pressing (EXIT/STOP).
≥In step 5, you cannot enter numbers greater than 12. Do not use military time.
(To set 13:00 hours, enter “0100”, and select “PM” by pressing ($).)
≥If you enter a wrong number in step 3 or step 5, press (fi) or (fl) to move the
cursor to the incorrect number. Enter the correct number.
Time:09:30PM
0-9=Time
21
¢
=AM/PM
4
=Next
“
13
For assistance, please call: 1-800-211-PANA(7262)
Preparation
Date:2002.04.15
0-9=Date
21
43 4
=Next
Date and Time
(Base\Unit)
Voice Day/Time Stamp: During playback, a synthesized voice will
announce the day and time that each message was recorded.
Date:2002.01.01
0-9=Date
21
43 4
=Next
Time:12:00AM
0-9=Time
21
¢
=AM/PM
4
=Next
1
Date and time
Save DIRECT#
43
1
=Yes
Date:2002.04.15
Time:09:30PM
3
=Edit
1
=Save
Date:2002.04.15
Time:09:30PM