Filter
Top Products
Programmable Settings
39
Programming via direct commands
You can also program most features using “direct commands”—special codes that take
you directly to the feature you wish to program and allow you to select the desired setting.
There is no need to scroll through the unit’s menus.
Details of each feature can be found on the corresponding pages.
1 Press {MENU}.
2 Enter the desired feature code (shown below).
3 Enter the desired setting code (shown below).
LThis step may vary depending on the feature being programmed.
4 Press {Save}.
5 Press {OFF} to exit programming mode.
Direct commands chart
Feature Feature code Setting code Page
Ringer volume {1} {1}{1}: Low {2}: Medium
{3}: High {0}: Off
page 33
Ringer tone {1} {2}{1}–{3}: Tone pattern 1–3
{4}–{7}: Melody pattern 1–4
page 33
Interrupt tone {1} {3}{1}: On {2}: 2 times {0}: Off page 34
Message play {2} –page44
Date and time {4} Go to step 3 on page 16. page 16
Voice enhancer {5}{1}: On {0}: Off page 34
Dial lock {6} Go to step 3 on page 36. page 36
Copy phonebook
(1 item)
*1
{#} {1} Go to step 4 on page 24. page 24
Copy phonebook
(all items)
*1
{#} {2} –page25
LCD contrast {0} {1}{1}–{6}: Level 1–6 page 35
Key tone {0} {2}{1}: On {0}: Off page 37
Auto talk {0} {3}{1}: On {0}: Off page 34
Set dial mode {0} {5} {1}{1}: Pulse {2}: Tone page 35
Set flash time {0} {5} {2}{1}: 700 ms {2}: 600 ms
{3}: 400 ms {4}: 300 ms
{5}: 250 ms
{6}: 110 ms
{7}: 100 ms {8}: 90 ms
page 35
Set line mode {0} {5} {3}{1}: A {2}: B page 36