Filter
Top Products
Useful Information
56
Answering system
Problem Cause & solution
I cannot listen to
messages from a remote
location.
LA touch tone phone is required for remote operation.
LPress the remote code correctly and press each key
firmly (page 45).
LThe answering system is off. Turn it on (page 46).
The other party
complains that they
cannot leave a voice
message.
LThe recording time is set to “Greeting only”. Select
“1min”, “2min”, or “3min” (page 48).
LThe memory is full. Erase unnecessary messages
(page 42).
“E” flashes and the
ANSWER ON indicator
flashes rapidly. No new
messages are recorded.
LMessage memory is full. Erase unnecessary messages
(page 42).
I cannot operate the
answering system.
LSomeone is operating the answering system.
LIf someone is talking on a conference call, you cannot
operate the answering system. Try again later.
During message
playback, the unit rings
and cancels playback.
LA call is being received. Answer the call and start again
from the beginning after hanging up.
The message indicator
on the handset flashes
slowly.
LNew messages have been recorded. Listen to the new
messages (page 42) or turn the message alert off (page
48).
When you play back
messages or turn on the
answering system, the
base unit and handset
announce the day and
time incorrectly.
LSet the date and time again (page 16).
TG2431AL_2432AL(e).book Page 56 Tuesday, March 15, 2005 6:37 PM