Filter
Top Products
Useful Information
For assistance, please call 1-800-211-PANA (7262). 57
Making/answering calls, Intercom
Phonebook
Problem Cause & solution
Static is heard, sound
cuts in and out.
Interference from other
electrical units.
LMove the handset and the ba se unit away fro m othe r
electrical appliances.
LMove closer to the base unit.
LRaise the base unit antenna.
LTurn on the clarity booster feature (page 20).
LIf your unit is connected to a telephone line with xDSL
service, we recommend connecting a noise filter
between the base unit and the telephone line jack.
Contact your xDSL provider for details.
The handset does not
ring.
LThe ringer volume is turned off. Adjust it (page 34).
I cannot make a call. L The dialing mode may be set incorrectly. Set the dial
mode (page 37) to match the type of telephone service
you have (tone or pulse).
LIf the base unit (including answering system) or the
other handset is in use, you may not be able to make a
call. Try again later.
LWhile listening to messages using the handset, you
cannot make a call. Exit by pressing {OFF}.
I cannot redial by
pressing {REDIAL}.
LIf the last number dialed was more than 48 digits long,
the number will not be redialed correctly.
LIf you press {REDIAL} after you have started dialing,
this button functions as the {PAUSE} button. To redial,
do not dial any numbers before pressing {REDIAL}.
I cannot have a
conversation using the
red