Filter
Top Products
Location of Controls
8
Handset soft keys
• When a function name does not appear above a soft key, the soft key has no
function.
Handset navigator key
Base unit display
1 “O” indicates the base unit ringer is off (p. 18).
2 “ ” flashes when no new messages can be
recorded. Erase unnecessary messages (p. 53).
3 “E” flashes until you set the date and time, and
flashes after a power failure. If it is flashing, set the
date and time (p. 14).
4 “ ” functions as follows.
• “ ” displays when a handset is operating the Answering System.
5 Message counter shows:
—the total number of recorded message s. If the recording time is set to
“Greeting only”, “ ” will be displayed (p. 22).
—the se lected volume level while you are adjusting the volume (p. 20).
—“ ” when your greetin g message or me mo messa g e was no t re corded
correctly (p. 20, 54).
Two soft keys are used to select functions displayed
directly above each key. Functions displayed above the
keys will change depending on th e state of use.
On this sample display, “ (VE)” and “Mute ” are
displayed above soft keys.
Scrolls up [
B
] and down [
d
] the function menu, the
Caller List and the phone book.
Increases [
B
] or decreases [
d
] the handset ringer and
receiver/speaker volumes.
Throughout these Operating Instructions:
• The sof t keys are indicated by what is displayed above the keys.
Ex. “Press Mute.” indicates “Press the soft key below Mute ”.
• The navigator key is indicated by the arrows [
d
] or [
B
].
Off (invisible) The line is free.
On The line is being used.
Flashing
A call is on hold on the handset or the Answering
System is answering a call (p. 48).
Flashing rapidly A call is being received.
J 5
Talk
00-00-32
(VE) Mute
KL
KL
Pressing the right soft key selects mute “Mute
”.
L
Pressing the left soft key selects Voi ce Enhancer “ (VE)
”.
K
FULL
RINGER
OFF
LINE IN USE
1
2
4
35
FULL
LINE IN USE
IN USE
PQQX13987YA.book 8 ページ ２００４年２月５日 木曜日 午前９時３分