Panasonic KX-TG2346 Answering Machine User Manual


 
42
Intercom
Intercom calls can be made between the handset and the base unit.
Making Intercom Calls
From
From
Using this feature, you can also locate a misplaced handset.
1 Press [HOLD/INTERCOM].
The base unit will ring for 1 minute.
To stop paging, press [OFF].
2 When the paged party answers, start talking.
You can switch to the speaker by pressing [s]. To
switch back to the receiver, press [C].
3 To disconnect the intercom, press [OFF].
1 Press [LOCATOR/INTERCOM].
The handset will ring for 1 minute.
To stop paging, press [LOCATOR/INTERCOM].
2 When the paged party answers, talk into the MIC.
3 To disconnect the intercom, press [LOCATOR/INTERCOM].
During an intercom call:
If you have difficulty hearing while using the han dset speakerphone and base
unit speaker, decrease the speaker volume by pressing VOLUME [<] on the
base unit or [
d
] on the handset.
If an incoming call is being received, you will hear two tones (incoming call
tone, page 46) and “ ” will flash rapidly on the base unit.
To answer the call, press [OFF], then [C] or [s].
Handset
Calling Base
Intercom
00-00-05
Mute
L
Base Unit
LINE IN USE
PQQX13987YA.book 42 ページ 2004年2月5日 木曜日 午前9時3分