Filter
Top Products
Useful Information
For assistance, please call: 1-800-211-PANA(7262)
49
Direct Commands
After pressing [MENU], you can also program menu items directly by pressing ([0]
to [9], and [#]) instead of using the soft keys.
During programming:
When “Save” is displayed, press the right soft key to save the new settings.
To exit programming, press [OFF].
• If you press the direct command incorrectly, press [OFF], then re-enter
programming mode by pressing [MENU].
• For function details, see the corresponding pages.
Menu item Command Selection items Page
Ringer volume [1] [1] [0] : Off [1] : Low [2] : Medium
[3] : High
p. 15
Ringer tone [1] [2] [1] – [3] : Tone pattern 1 – 3
[4] – [7] : Melody pattern 1 – 4
p. 16
Incoming call tone [1] [3] [1] : On [2] : Twice [0] : Off p. 44
V.M. access [3] p. 41
Voice enhancer [5] [1] : On [0] : Off p. 20
Copy phone book
–Copy 1 item
[#] [1] Go to Step 4 on page 34. —
Copy phone book
–Copy all items
[#] [2] p. 35
LCD contrast [0] [1] [1] – [6] : Level 1 – 6 p. 17
Key tone [0] [2] [1] : On [0] : Off p. 45
Auto talk [0] [3] [1] : On [0] : Off p. 14
Caller ID number auto
edit
[0] [4] [1] : On [0] : Off p. 26
Set dial mode [0] [5] [1] [1] : Pulse [2] : Tone p. 13
Set flash time [0] [5] [2] [1] : 700 ms [2] : 600 ms
[3] : 400 ms [4] : 300 ms
[5] : 250 ms [6] : 110 ms
[7] : 100 ms [8] : 90 ms
p. 44
Set line mode [0] [5] [3] [1] : A [2] : B p. 14
Store VM access# [0] [7] [1] Go to Step 5 on page 39. —
VM tone detect [0] [7] [2] [1] : On [0] : Off p. 40
Change language [0] [8] [1] : English [2] : Spanish p. 13
Message alert [0] [#][1] : On [0] : Off p. 17
Handset