Filter
Top Products
Special Features
44
FLASH Button
Pressing [FLASH/CALL WAIT] allows you to use special features of your host PBX
such as transferring an extension call, or accessing optional telephone services
such as call waiting.
• Pressing [FLASH/CALL WAIT] cancels Temporary Tone Dialing mode or the
mute (p. 42).
Selecting the flash time
The flash time required depends on your telephone exchange or host PBX.
You can select the following flash times: “700, 600, 400, 300, 250, 110, 100 or
90 ms (milliseconds)”. The factory preset is “700 ms”.
• If PBX functions do not work correctly, consult your PBX supplier for the correct
settings.
Incoming Call Tone
During an intercom call (p. 36), you can be informed of incoming calls by two tones.
If this feature is turned on, incoming call tones will be heard for as long as the line is
ringing. If this feature is set to “2”, incoming call tones will be heard only 2 times.
If this feature is turned off, no tones will be heard. The factory preset is “2”.
1 Press [MENU].
2 Scroll to “Initial setting” by pressing [
d
] or [
B
], then press
Select.
3 Scroll to “Set tel line” by pressing [
d
] or
[
B
], then press Select.
4 Scroll to “Set flash time” by pressing [
d
]
or [
B
], then press Select.
5 Select the desired time by pressing [
d
] or [
B
].
6 Press Save, then press [OFF].
1 Press [MENU].
2 Scroll to “Ringer setting” by pressing [
d
] or [
B
], then press
Select.
3 Scroll to “Incoming call.” by pressing [
d
]
or [
B
], then press Select.
4 Select “On”, “Off” or “2” by pressing [
d
] or
[
B
].
5 Press Save, then press [OFF].
Handset
Set tel line
Back Select
K
d
BL
Set flash time
Back Select
K
d
BL
Set flash time
:700ms
Back Save
K
d
BL
Handset
Incoming call.
Back Select
K
d
BL
Incoming call
tone :2
Back Save
K
d
BL