Filter
Top Products
Useful Information
56
Static is heard, sound cuts in and
out. Interference from other
electrical units.
L Locate the handset and the base unit away from
other electrical appliances.
L Move closer to the base unit.
L Your unit is connected to a telephone line with DSL
service. We recommend connecting a filter (contact
your DSL service provider) to the telephone line
between the base unit and the telephone line jack.
Noise is heard during a call. L You are using the handset or base unit in an area
with high electrical interference. Locate the handset
and base unit away from interference sources, such
as antenna and mobile phones.
The handset/base unit stops
working while being used.
L Disconnect the AC adaptor and turn off the
handset. Connect the AC adaptor, turn on the
handset and try again.
While storing an entry in the
phonebook or assigning a one
touch dial, the handset starts to
ring.
L A call is being received. To answer the call, press
{C}. Programming will be cancelled. Start again.
Pressing {R} does not
display/dial the last number dialled.
L The redialled number was more than 24 digits long.
Redial the number manually.
The handset beeps intermittently
and/or 7 flashes.
L Fully charge the batteries (page 10).
I fully charged the batteries, but
7 still flashes.
L Clean the charge contact and charge again (page
10).
L It is time to replace the batteries (page 11).
Caller information is not displayed. L You must subscribe to Caller ID service.
L Consult your service provider.
L Your unit is connected to a telephone line with DSL
service. We recommend connecting a filter (contact
your DSL service provider) to the telephone line
between the base unit and the telephone line jack.
While viewing caller information,
the display returns to standby
mode.
L Do not pause for over 1 minute while searching.
I cannot set call restriction. L Call restriction can be set using handset 1 only. If
you have multiple handsets, you can confirm which
handset is handset 1 by pressing {x} and {1} on
the base unit. Handset 1 will start ringing.
Problem Cause & solution
TG1223-1233BX(e-e).book Page 56 Wednesday, November 15, 2006 3:32 PM