Filter
Top Products
Programming
22
For assistance, please visit http://www.panasonic.com/help
*1 If you program these settings using one of the handsets, you do not need to program the same item
using another unit.
Programming using the direct commands
1
{MENU} i {#}
2 Enter the desired feature code.
3 {V}/{^}: Select the desired setting. i {SAVE}
L This step may vary depending on the feature being programmed.
L To exit the operation, press {■}(EXIT) on the base unit or {OFF} on the handset.
Note:
L The operating unit column shows the unit(s) that can be used to program the item.
=: Only the base unit can program the item.
Y: Only the handset can program the item.
=/Y : Both the base unit and handset can program the item.
L In the following table, < > indicates the default settings.
Operating
unit
Feature Feature
code
Setting System
setting
*1
Page
Y Alarm {7}{2}{0} <Off>
Once
Daily
–25
Y Answer off {3}{2}{8} – r 31
Y Answer on {3}{2}{7} – r 31
Y Auto talk
*2
{2}{0}{0} On
<Off>
–14
=/Y Block w/o num.
(Block calls without
phone number)
{2}{4}{0} On
<Off>
r 26
=/Y Call block {2}{1}{7} – r 26
=/Y Caller ID edit
(Caller ID number auto
edit)
{2}{1}{4} <On>
Off
–29
=/Y Caller list {2}{1}{3} ––28
Y Check greeting {3}{0}{3} ––32
=/Y Customer support
*3
{6}{8}{0} –––
Y Date and time {1}{0}{1} – r 12
Y Deregistration {1}{3}{1} ––27
= Display language {1}{1}{0} <English>–12
Y Display
(Change language)
Español
Y Erase all msg.
(msg.: messages)
{3}{2}{5} – r 33
Y Intercom {2}{7}{4} ––38
Y Key tone
*4
{1}{6}{5} <On>
Off
––
=/Y LCD contrast
(Display contrast)
{1}{4}{5} Level 1–6 <3> – –
TG106x(e).book Page 22 Friday, January 16, 2009 10:45 AM