Filter
Top Products
Programming
26
For assistance, please visit http://www.panasonic.com/help
Call block (Caller ID subscribers
only)
This feature allows the unit to reject calls when:
– the unit receives a call from a phone number
stored in the call block list as unwanted (“Storing
unwanted callers”, page 26).
– the unit receives a call without phone number
(“Block calls without phone number”, page 26).
When a call is received, the unit rings for a short
time while the caller is being identified. If the unit
recognizes the call as unwanted, “Caller
blocked” is displayed and the unit sends out a
busy tone to the caller, and then disconnects the
call.
Program this setting using either the base unit or
one of the handsets.
Important:
L When the unit receives a call from a number that
is stored in the call block list or a call without a
recognized phone number, the call is logged in
the caller list (page 28) with $ after the call is
disconnected.
Storing unwanted callers
You can store up to 30 phone numbers in the call
block list by using the caller list or by entering the
numbers directly.
Important:
L It is advised to store the 10 digits (including an
area code) because if 7 digits are stored, all
numbers that have the last 7 digits will be
blocked.
■ From the caller list:
1 Proceed with the operation for your unit.
Base unit: {CID}
Handset: {MENU} i {V}/{^}: “Caller
list” i {SELECT}
2 {V}/{^}: Select the entry to be blocked.
L To edit the number, press {EDIT}
repeatedly until the phone number is
shown in the 10-digit format.
3 {SAVE}
4 {V}/{^}: “Call block” i {SELECT}
5 {V}/{^}: “Yes” i {SELECT}
6 Proceed with the operation for your unit.
Base unit: {■} (EXIT)
Handset: {OFF}
■ By entering phone numbers:
1 {MENU} i {#}{2}{1}{7} i {ADD}
2 Enter the phone number (24 digits max.).
L To erase a digit, press {CLEAR}.
3 {SAVE}
4 Proceed with the operation for your unit.
Base unit: {■} (EXIT)
Handset: {OFF}
Block calls without phone number
You can reject a call without phone number
including “Out of area”, “Private caller”,
or “Long distance”.
1 {MENU} i {#}{2}{4}{0}
2 {V}/{^}: Select the desired setting. i
{SAVE}
3 Proceed with the operation for your unit.
Base unit: {■} (EXIT)
Handset: {OFF}
Viewing/editing/erasing call block numbers
1 {MENU} i {#}{2}{1}{7}
2 {V}/{^}: Select the desired entry.
L To exit, press {■} (EXIT) on the base unit or
{OFF} on the handset.
3 Proceed with the desired operation.
■ Editing a number:
{EDIT} i Edit the phone number. i
{SAVE} i Press {■} (EXIT) on the base
unit or {OFF} on the handset.
■ Erasing a number:
{ERASE} (soft key) i {V}/{^}: “Yes” i
{SELECT} i Press {■} (EXIT) on the
base unit or {OFF} on the handset.
Note:
L When editing, press the desired dial key to add,
{CLEAR} to erase.
L When viewing, {w/o NUM} appears if the block
calls without phone number feature is turned on.
To turn the feature off: {w/o NUM} i {V} i
{SAVE} i Press {■} (EXIT) on the base unit
or {OFF} on the handset.
= Base unit / Y Handset
= Base unit / Y Handset
= Base unit / Y Handset
TG106x(e).book Page 26 Friday, January 16, 2009 10:45 AM