Panasonic KX-TG1061 Answering Machine User Manual


 
Programming
25
For assistance, please visit http://www.panasonic.com/help
Special programming
Silent mode
Silent mode allows you to select a period of time
during which the base unit and/or handset will not
ring for outside calls. This feature is useful for time
periods when you do not want to be disturbed, for
example, while sleeping. Silent mode can be set
independently for each base unit and handset.
Important:
L Set the date and time beforehand (page 12).
L Handset only: If you have set the alarm, the
alarm sounds even if the silent mode is turned
on.
Turning silent mode on/off
1 {MENU} i {#}{2}{3}{8}
2 {V}/{^}: Select On or Off. i {SAVE}
L If you select Off, press {} (EXIT) on the
base unit or {OFF} on the handset to exit.
3 Enter the desired hour and minute you wish to
start this feature.
4 {AM/PM}: Select AM or PM. i {OK}
5 Enter the desired hour and minute you wish to
end this feature.
6 {AM/PM}: Select AM or PM.
7 {SAVE}
8 Proceed with the operation for your unit.
Base unit: {} (EXIT)
Handset: {OFF}
L When the silent mode is set, & is
displayed.
Note:
L To correct a digit, proceed with the operation for
your unit.
Base unit: press {7} or {8} to move the
cursor to the digit, then make the correction.
Handset: press {^} or {V} to move the cursor to
the digit, then make the correction.
Changing the start and end time
1 {MENU} i {#}{2}{3}{7}
2 Continue from step 3, “Turning silent mode
on/off”, page 25.
Alarm
An alarm sounds at the set time for 3 minutes once
or daily. Alarm can be set for each handset.
Important:
L Set the date and time beforehand (page 12).
1 {MENU} i {#}{7}{2}{0}
2 {V}/{^}: Select the desired alarm option. i
{SELECT}
3 Enter the desired month and date. i {OK}
4 Set the desired time. i {OK}
5 {V}/{^}: Select the desired ringer tone. i
{SELECT}
L We recommend selecting a ringer tone
different from the ringer tone set for outside
calls.
6 {V}/{^}: Save i {SELECT} i {OFF}
L When the alarm is set, E is displayed.
Note:
L To stop the alarm, press any dial key or place
the handset on the charger.
L When the handset is in use, the alarm will not
sound until the handset is in standby mode.
L If you select Once, the setting changes to
Off after the alarm sounds.
= Base unit / Y Handset
Y Handset
Off Turns alarm off. Go to step 6.
Once An alarm sounds once at the set
time.
Daily An alarm sounds daily at the set
time. Go to step 4.
TG106x(e).book Page 25 Friday, January 16, 2009 10:45 AM