Filter
Top Products
3.2 Manager Programming
Operating Manual 181
3.2 Manager Programming
3.2.1 Programming Information
The manager can program the following item.
• Other Extensions Control
Available Extension
The extension assigned as a manager
Required Telephone
A Panasonic Proprietary Telephone with display (over 2 lines)
(e.g., KX-NT343, KX-NT346, KX-T7636)
Manager Password
To enter programming mode, the manager password (max. 10 digits) is required. (Default: 1234)
WARNING
• The PBX has a default password preset. For security, change the password the first time that
you program the PBX.
• It is strongly recommended that a password of 10 numbers or characters be used for
maximum protection against unauthorized access. For a list of numbers and characters that
can be used in the password, refer to "1.3.14 Character Entry".
• To avoid unauthorized access to the PBX, keep the password secret. If it becomes known to
others, the PBX may be misused.
• Change the password periodically.
Conditions
The programming extension must be idle, on-hook and holding no calls.