Filter
Top Products
3.3 Installation of the KX-TDA Maintenance Console
148 Installation Manual
Installing the KX-TDA Maintenance Console and Selecting
Appropriate Country/Area Data
To install or uninstall the software into Windows 2000 Professional or Windows XP
Professional, the user must be grouped either of "Administrators" or "Power Users".
Starting the KX-TDA Maintenance Console and Assigning the Basic
Items (Quick Setup)
When you start the KX-TDA Maintenance Console with the Installer Level Programmer Code
and connect to the Hybrid IP-PBX for the first time after initialisation (with the factory default
setting), Quick Setup will launch automatically. During Quick Setup, you will setup the following
basic items:
• Date and Time of the Hybrid IP-PBX. The date and time set on the PC will be used.
• System Password for installer for PC programming.
• Operator extension numbers. Operator extensions for all time modes (day/lunch/
break/night) can be assigned.
• Flexible Numbering type to pattern 1 or pattern 2. If pattern 1 (with ) is selected, " "
must prefix all feature numbers (except access numbers) when an extension user
wants to use a feature.
• Operator call and Idle Line Access/ARS numbers (0 or 9). The feature numbers for
operator call and Idle Line Access/ARS can be selected.
• Remote Maintenance Dial Number. Enter the complete telephone number of the PBX
(including the country code). When necessary, this number will be used to access the
PBX from a remote location for maintenance purposes.
1.
a. Save the setup file of the KX-TDA
Maintenance Console on your PC.
b. Double-click the icon to execute the
setup file.
c. Follow the instructions of the wizard.
2.
a. Type the appropriate Country Code.
The KX-TDA Maintenance Console will
be installed with the appropriate default
data for specific country/area.
b. Click [Next].
c. Follow the instructions of the wizard.
d. Click [Finish].
e. Click [OK].