Panasonic KX-TD7896 IP Phone User Manual


 
Troubleshooting and Error Messages
37
Even when in standby mode, you
cannot access the Phonebook or
other menus.
( is displayed in standby
mode.)
The BGM setting may be on.
Press then , and press .
Noise is frequently heard. Set the handset and base unit away from other electrical
appliances.
Move closer to the base unit.
Two short beeps are heard
during a conversation.
The radio signal is weak.
Move closer to the base unit.
The charge indicator flashes red
rapidly.
The charger is not connected properly.
Make sure the battery is inserted properly.
Set the handset in the charger properly.
You charged the battery for 7
hours, but the beep tones sound
and (needs to be charged)
flashes after a few telephone
calls.
The battery charge contacts may be dirty.
Clean the battery charge contacts without damaging them
and charge once more.
It is time to change the battery.
Replace with a new one.
While operating the unit, the AC
adaptor feels warm. While
charging the battery, the handset
feels warm.
These are normal conditions.
Problem Description and Solution
0
5
1
7