Filter
Top Products
53
➡ Before Requesting Help
Problem Cause and Remedy
You cannot redial. • If the last number dialled was more than 24 digits
long, the number will not be redialled correctly.
You cannot program the handset • Programming is not possible while the unit is in the
settings such as display language • talk, speakerphone or intercom mode or when
viewing the Caller List/Phonebook list.
• Do not pause for over 60 seconds while
programming.
• Make sure that the handset is in the standby mode.
You cannot store a name or phone • You cannot store a name and phone number while
number in the Phonebook. • the unit is in the talk, speakerphone or intercom
mode.
• Do not pause for over 60 seconds while storing.
While programming or searching, • To answer the call,
ZOor %
.
the unit starts to ring and stops • Start again from the beginning after hanging up.
the program/search.
The display goes to the standby • Do not pause for over 60 seconds while searching.
mode while viewing the Caller List
or phonebook.
Ï
does not function. • The handset is too far from the base unit.
• The handset is engaged in an outside call or is
viewing the Caller List or Phonebook.
The paged handset does not • The handset is not in the same radio area.
answer. • The handset is engaged in an outside call.
• The handset has been cancelled or has not been
registered. Register the handset in the base unit
(pages 39, 41).
While using the intercom, 2 tones • A call is being received. To answer press
P then
O.
The unit misdials when connected • Check the pause function (pages 44).
to a PBX.
sound.
30678_KX-TCD705 Dutch_a_English 22/6/01 9:22 am Page 53