![](http://pdfasset.owneriq.net/2/62/26212028-59ce-4c98-8993-d75f53f5f7e3/26212028-59ce-4c98-8993-d75f53f5f7e3-bg2c.png)
◆ Select Pause Timing
Follow
steps 1
to 3 on
page 42
Ł C Ł
Enter
Base PIN
(4-digits)
Current
setting is
displayed.
Ł C Ł
A or B
1 = 3 seconds
2 = 5 seconds
Ł
Y or
V
You can set the pause timing to 3 or 5 seconds, depending on your PBX requirements.
The factory preset is 3 seconds.
➡ Base Programming
44
4 levels are available. The factory preset is MEDIUM. When set to OFF, the base unit
will not ring.
◆ Select the Base Unit Ringer Volume
Follow
steps 1
to 3 on
page 42
Ł
Y or
V
Ł B (twice) Ł
K - C
Select Volume.
Current setting is displayed.
0 = Ringer OFF
1 = Low Volume
2 = Medium Volume
3 = High Volume
(Ringer sounds on selection)
KX-TCD705_HongKong 12/7/01 2:29 pm Page 44