Filter
Top Products
You can program a 4-digit password for the base unit. The factory preset is 0000.
Changing the password may prevent the unauthorised use of your unit by another
person.
◆ Set Base Unit PIN
Follow
steps 1
to 3 on
page 43
Enter current
Base PIN
(4-digits)
Ł E Ł
Ł
Enter new Base PIN (4-digits) TWICE
If 2nd entry of NEW PIN is incorrect, an error
tone sounds.
If 2nd entry is correct, a confirmation tone
sounds and display returns to function menu
.
NOTE: Once you have programmed the password, you cannot confirm it. We
recommend you write down the password. If you forget it, please consult your nearest
Panasonic Service Centre.
➡ Base Programming
44
4 levels are available. The factory preset is MEDIUM. When set to OFF, the base unit
will not ring.
◆ Select the Base Unit Ringer Volume
Follow
steps 1
to 3 on
page 43
Ł
Y or
V
Follow
steps 1
to 3 on
page 43
Ł A Ł
Enter
Base PIN
(4-digits)
Ł
Y or
V
A-B
The current
setting is
displayed.
1 = Tone Dial Mode.
2 = Pulse Dial Mode
Ł B (twice) Ł
K - C
Select Volume.
Current setting is displayed.
0 = Ringer OFF
1 = Low Volume
2 = Medium Volume
3 = High Volume
(Ringer sounds on selection)
◆ Select the Dialling Mode
You can program the dialling mode to tone or pulse. If you have a touch tone service,
set to tone. If rotary or pulse service is used, set to pulse. The factory preset is tone.
Ł C Ł
KX-TCD705BX 12/7/01 2:28 pm Page 44