Filter
Top Products
Paging/Intercom ➡
Paging All Handsets from the Base Unit
1. ZÏ(On the Base Unit).
• All handsets will ring for one minute.
2. To stop paging, ZÏagain or ZOon one of the handsets.
Intercom between Handsets
A 2-way intercom is available between handsets.
Eg. Handset 1 is paging Handset 2
1. (Handset 1) ZN
(Int icon blinks until connection is established).
2. (Handset 1) ZB
3. (Handset 2)
When the unit rings, ZOto answer.
• The intercom duration is displayed.
4. (Handsets 1 and 2)
To end the intercom, ZP.
• Intercom calls can be conducted within the radio area of the
current base unit, but not with units in neighbouring radio
areas.
Intercom cannot be accepted in the following areas:
– when the other party is in intercom mode.
– when the other party is on hold during external call.
– while the other party is in conference call.
Transferring a Call from One Handset to Another
The intercom can be used during a call, enabling you to transfer
a call between handsets registered to the same base unit.
Transferring a Call using the Intercom
Eg. Handset 1 is transferring an external call to Handset 2.
1. (Handset 1)
During a call, ZN(Intercom icon turns on).
• The call is put on hold.
2. (Handset 1) Z desired handset no. eg. B
• You will hear an internal ring back tone until the other
handset is answered.
23
-1-œœœœœœœ02
ÂÊÁËÈÍ
ÎÏÔÓÒ
(1)
ÂÊÁËÈÍ
ÎÏÔÓÒ
(1)-(2)
ÂÊÁËÈÍ
ÎÏÔÓÒ
00-00-00
ÂÊÁËÈÍ
ÎÏÔÓÒ
(1)
ÂÊÁËÈÍ
ÎÏÔÓÒ
(1)-(2)
ÂÊÁËÈÍ
ÎÏÔÓÒ
31939_KX-TCD700CX_Czech 18/6/01 1:54 pm Page 23