Filter
Top Products
80
Base Unit Settings
Other Options
To exit the operation, press at any time.
Changing the Base Unit PIN (Personal Identification Number)
The factory preset is 0000.
Reset the Base Unit Settings
1
Press JOYSTICK
(or move).
2
Select “ Setting
Base”.
3
Enter 4-digit Base
Unit PIN.
(Factory Preset
0000)
4
Select “Other Option”.
Go to step 5.
Once you have programmed the base unit PIN, you cannot confirm it. We recommend
you write down the base unit PIN. If you forget it, please consult our Panasonic
Customer Care Helpline. U.K. 08700 100 076 R.O.I. 01289 8333
Follow steps 1 to 4 shown above, then:
5
Select “Change Base
PIN”.
6
Enter new 4-digit Base
Unit PIN.
7
Enter new 4-digit
Base Unit PIN again
to verify.
You can reset all of the base unit settings to their initial settings.
Follow steps 1 to 4 shown above, then:
5
Select “Reset Base”.
6
Select “Yes”, then “Deleted” is
displayed.
545E_E_04.fm Page 80 Saturday, August 30, 2003 5:57 PM