Filter
Top Products
Helpline Tel.No. :U.K. 08700 100 076 R.O.I. 01289 8333 77
Telephone System
Base Unit Settings
Call Options
To exit the operation, press at any time.
Selecting the Flash/Earth Mode
You can change the duration of the recall time depending on the requirements of your
network provider or PBX.
• The factory preset is “Flash”.
“Type 1”: 700 ms, “Type 2”: 80 ms, “Type 3”: 400 ms. The factory preset is “Type 2”.
Call Options and Other Options of Base Unit Settings must be operated with the
cordless handset.
1
Press JOYSTICK
(or move).
2
Select “ Setting
Base”.
3
Enter 4-digit Base
Unit PIN.
(Factory Preset 0000)
4
Select “Call Option”.
Go to step 5.
Follow steps 1 to 4 shown above, then:
5
Select “Recall”.
6
Select “Flash” or “Earth”.
When “Flash” is selected;
7
Select the desired flash type. (see below)
545E_E_04.fm Page 77 Saturday, August 30, 2003 5:57 PM