Filter
Top Products
57
Cordless Telephone
Base Unit Settings
Call Options
To exit the operation, press at any time.
Selecting the Recall Time
You can change the duration of the recall time depending on the requirements of your
Network provider or PBX.
• The factory preset is “Type 2” (110 ms).
Selecting the Pause Time
You can select the pause time to 3 or 5 seconds, depending on your PBX requirements.
• The factory preset is “Short”.
1
Press JOYSTICK
(or move).
2
Select “ Setting
Base”.
3
Enter 4-digit Base
Unit PIN.
(Factory Preset 0000)
4
Select “Call Option”.
Go to step 5.
Follow steps 1 to 4 shown above, then:
5
Select “Recall”.
6
Select “Type 1” (700 ms), “Type 2” (110 ms) or
“Type 3” (200 ms).
Follow steps 1 to 4 shown above, then:
5
Select “Pause Time”.
6
Select “Short” (3 sec.) or “Long” (5 sec.).
515NL_e.book Page 57 Tuesday, July 15, 2003 1:53 PM