Filter
Top Products
Helpline Tel. No. :U.K. 08700 100 076 R.O.I. 01289 8333 27
Answering System Features (KX-TCD445 only)
L Hold the handset about 20 cm away
and speak clearly into the microphone.
5 Press {9} to stop recording.
6 Press {ih}.
Note:
L Voice memos are treated as new
messages.
Memory capacity
The total recording capacity (including your
greeting message, caller messages, voice
memos, and recorded conversations) is
about 20 minutes. A maximum of
64 messages can be recorded.
L If message memory becomes full, r
flashes rapidly. To record additional
messages, you will need to erase
unnecessary messages.
L Messages are retained even if a power
failure occurs.
Remote operation
Using a touch tone phone, you can call your
phone number from outside and access the
unit to listen to messages or change
answering system settings. The unit’s voice
guidance will prompt you to press certain
dial keys to perform different operations.
Important:
L In order to operate the answering system
remotely, you must first turn on remote
operation by setting a remote access
code. This code must be entered each
time you operate the answering system
remotely.
Turning remote operation on/off
A 3-digit remote access code must be
entered when operating the answering
system remotely. This code prevents
unauthorised parties from listening to your
messages remotely. After you store your
remote access code, remote operation is
possible.
1 Press {j}.
2 Press {v} repeatedly to display
“SETTING BS”, then press {>}.
3 Press {#}.
4 Press {1}.
5 To turn on remote operation, enter a
3-digit remote access code.
L To turn off remote operation, press
{*}.
6 Press {>}, then press {ih}.
Using the answering system
remotely
1
Dial your phone number from a touch
tone phone.
L If the number of rings is set to “AUTO”
(page 28), the number of rings you
hear will indicate whether or not you
have new messages.
2 After the greeting message starts, enter
your remote access code.
L The unit will announce the number of
new messages.
L After 3 seconds, voice guidance starts.
3 Follow the voice guidance prompts as
necessary.
Note:
L You can hang up at any time.
L You can ignore the voice guidance and
control the unit using remote commands
(page 28).
Voice guidance
During remote operation, the unit’s voice
guidance will prompt you to press {1} to
perform a specific operation, or press {2} to
listen to more available operations.
Operations are presented by voice guidance