Filter
Top Products
22 Helpline Tel. No. :U.K. 08700 100 076 R.O.I. 01289 8333
Useful Telephone Settings
Guide to base unit
settings
For your reference, a chart of all items which
can be customised for the base unit is
printed below. Details of each item can be
found on the corresponding pages.
*1 If you cancel a handset, the base unit will
“forget” the handset registration.
Base unit settings
Changing base unit PIN (Personal
Identification Number)
The base unit’s default PIN is “0000”.
Important:
L If you change the PIN, please write down
your new PIN as the unit will not reveal the
PIN to you. If you forget your PIN, consult
your nearest Panasonic service centre.
1 Press {j}.
2 Press {v} repeatedly to display
“SETTING BS”, then press {>}.
3 Press {5}.
4 Enter the current 4-digit base unit PIN.
5 Enter the new 4-digit base unit PIN.
6 Enter the new 4-digit base unit PIN again.
7 Press {ih}.
Adjusting ringer volume
4 levels (high to off) are available.
1 Press {j}.
2 Press {v} repeatedly to display
“SETTING BS”, then press {>}.
3 Press {2} 2 times.
4 Select the desired setting by pressing {1}
for low, {2} for medium, {3} for high or
{0} for off.
5 Press {>}, then press {ih}.
Setting pause length
1
Press {j}.
2 Press {v} repeatedly to display
“SETTING BS”, then press {>}.
3 Press {3}.
Code
No.
Feature
(Default setting)
Page
{0} Reset base unit page 24
{1} Set all or selected
handsets to ring
(All handsets ring)
page 32
{2} Base unit ringer volume
(Medium)
page 22
{3} Pause length
(3 seconds)
page 22
{5} Change base unit PIN
(“0000”)
page 22
{6} Call restriction page 23
Emergency number
(“112” and “999”)
page 23
{7} Cancel a handset
*1
page 31
{*} Time and date page 9