Filter
Top Products
3 Speed Dialler
You can store up to 10 phone numbers.
The dialling buttons ({0} to {9}) function as memory stations.
The TALK indicator light must be off before programming.
1 Press {PROGRAM}.
• The TALK indicator flashes.
2 Enter a phone number up to 16 digits.
3 Press {AUTO}.
4 Press a memory station number ({0} to {9}).
• A beep sounds.
• To store other numbers, repeat steps 1 through 4.
• If a pause is required for dialling, press {PAUSE}
where needed.
Pressing {PAUSE} counts as one digit (5-B).
Press {TALK} N {AUTO} N the memory station number ({0} to {9}).
• The stored number is dialled.
3-A Storing Phone Numbers in Memory
3-B Dialling a Stored Number
If you misdial
Press {PROGRAM} to end storing. N
N Start again from step 1.
To erase a stored number
Press {PROGRAM} N {AUTO} N
N the memory station number ({0} to {9})
for the phone number to be erased.
• A beep sounds.
4 One-Touch Dialler
TALK
Indicator
Memory Station
Numbers
{PROGRAM}
{AUTO}
{DIRECT}
{TALK}
A phone number stored in the {DIRECT} button can be dialled with a one-touch operation.
The TALK indicator light must be off before programming.
1 Press {PROGRAM}.
• The TALK indicator flashes.
2 Press {DIRECT}.
3 Enter a phone number up to 48 digits.
4 Press {DIRECT}.
• A beep sounds.
• If a pause is required for dialling, press {PAUSE}
where needed.
Pressing {PAUSE} counts as one digit (5-B).
Press {TALK} N {DIRECT}.
4-A Storing a Phone Number in the DIRECT Button
4-B Dialling a Stored Number in the DIRECT Button
TALK
Indicator
Memory Station
Numbers
{PAUSE}
{PROGRAM}
{AUTO}
{TALK}
If you misdial
Press {PROGRAM} to end storing. N
N Start again from step 1.
To erase a stored number
Press {PROGRAM} N {DIRECT} N
N {DIRECT}.
• A beep sounds.