Filter
Top Products
1 Getting Started
1-A Accessories
A AC Adaptor . one A Battery . . . . . one
A Telephone Line Cord . . . . . . . . . . . . one
A For Australia For New Zealand
AHandset Cover . .
one
A Wall/Desk Stand. .
one
For Australia only
ATelephone plug. . . . . . . . . . . . . . . . . one
1-B Location of Controls
{TALK} Button (2-A)
{RECALL} Button
(5-C)
{RINGER}
Button (2-B)
{PROGRAM} Button
(1-C, 3-A, 4-A, 5-C)
{LOUD} Button (2-A)
{REDIAL} Button
(2-A)
{AUTO} Button
(1-C, 3-A, 5-C)
{PAUSE}
Button (5-B)
{DIRECT} Button
(4-A)
Antenna
{CH} (Channel)
Button (2-A)
Charge Contacts (6-A)
TALK/RECHARGE
Indicator (6-A)
IN USE/CHARGE
Indicator (1-C, 5-A)
Antenna (1-C)
Charge
Contacts
(6-A)
{HANDSET LOCATOR}
Button (5-A)
RECALL
Base unit
Handset
1 Install the Wall/Desk stand before use.
Insert the hooks in the direction (1) then push the tabs as
shown (2).
• The word “UP DESK” should face upward.
2 Connect as shown.
• If you subscribe to an xDSL service
• Please attach a noise filter (contact your xDSL provider) to the telephone
line between the base unit and the telephone line jack or socket in the
event that noise is heard during conversations.
• USE ONLY WITH Panasonic AC ADAPTOR PQLV16AL.
• The AC adaptor must remain connected at all times.
(It is normal for the adaptor to feel warm during use.)
• The unit will not work during a power failure. If you want to connect to a
standard telephone on the same line;
—KX-TC2100AL: Use a telephone double adaptor.
—KX-TC2100NZ: Use a T-adaptor.
• KX-TC2100AL and KX-TC2100NZ are not designed to be used with
rotary (pulse dialling) services.
3 Install the battery in the handset, and close the handset cover,
locking it into place.
4 Charge the battery for about 9 hours.
• See section 6-A for more details.
• The CHARGE indicator lights.
1-C Settings
2
2
1
Noise Filter
(For xDSL users)
Telephone
Line Cord
Fasten the AC adaptor cord.
Hooks
AC Adaptor
To Power Outlet
(AC 230–240 V, 50/60 Hz)
To Socket
For New Zealand
To Single-Line
Telephone Jack
For Australia
OR
Black
Lead
Red
Lead
Extend
the
antenna
fully.
CHARGE
Indicator